Crown’s XTi models of amplifiers defines the standard for portable PA systems with unmatched performance, technology and power-to-the-people affordability that delivers the goods night after night without even breaking a sweat.
Innovations like integrated DSP that allows you to quickly and easily configure crossovers, EQ, limiting and delay, along with tools like a pink noise generator, subharmonic synthesizer, and universal tracking switch-mode power supply, which reduces power draw and waste heat. And as the first Crown amps to use Icepak™ thermal modeling software, they are at the top of their class when it comes to thermal efficiency and lightweight portability.
Features:
• Stereo, 2 ohms (per ch.): 3000W
• Stereo, 4 ohms (per ch.): 2100W
• Stereo, 8 ohms (per ch.): 1200W
• Bridge-Mono, 4 ohms: 6000W
• Bridge-Mono, 8 ohms: 4200W
Technical Data:
• Sensitivity (volts RMS) for full rated power at 4 ohms: 1.4V
• Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) +0/–1 dB
• Signal to Noise Ratio (below rated 1 kHz power at 8 ohms), A-weighted 100 dB (103 dB in XTi 6000)
• Damping Factor (8 ohm): 20 Hz to 400 Hz > 500
• Input Stage Input is electronically balanced and employs precision 1% resistors.
• AC Line Current (120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): XTi 1000: 6.8A, XTi 2000: 8.3A, XTi 4000: 10.5A; at idle draws no more than 30 watts.
XTi 6000: 15.3A; at idle draws no more than 180 watts.
• Crosstalk (below rated power) 20 Hz to 1 kHz: > 70 dB
• Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced
• Load impedance (note: safe with all types of loads):
Stereo: 2-8 ohms (4-8 ohms in XTi 1000 A1 100V versions)
Bridge mono: 4-16 ohms (8-16 ohms in XTi 1000 A1 100V versions)
• Voltage Gain (at 1 kHz, 8 ohm rated output): XTi 1000: 30.5 dB. XTi 2000: 32.9 dB. XTi 4000: 34.2 dB. XTi 6000: 37.1 dB.
• Maximum Input Signal: +22 dBu typical
• Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing)
• AC Line Voltage and Frequency Configurations Available (± 10%): 100V, 120V, 220-240V 50/60 Hz
• Ventilation: Flow-through ventilation from front to back
• Cooling: Heat sinks and proportional-speed fan
• Dimensions: Width, Height, Depth (behind mounting surface) EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x12.25 in. (31.1cm) D XTi 6000 is 16.2 in. (41.15 cm) D
• Net Weight, Shipping Weight: 18.5 lb (8.4 kg), 21.5 lb (9.8 kg) XTi 6000 is 24.0 lb (10.9 kg), 30.0 lb (13.6 kg)
Numero di oggetti nell'imballo:1
Numero di oggetti per scatola:1
