The Ortofon Digitrack is made for computer mixinging systems like Rane Serato Scratch
or Stantons Final Scratch. It has a very high output voltage and a spherical stylus are a very good combination for often use like the Timecode vinyls of these systems.
Features
• 1 System
• 1 Replacement Stylus
• Small brush
• Inside a velvet-case
Technical Data
• Output voltage at 1000 Hz, 5cm/sec.: 8 mV
• Channel balance at 1 kHz: 1,5 dB
• Channel separation at 1 kHz: 22 dB
• Channel separation at 15 kHz: 15 dB
• Frequency range: 20-20.000 Hz
• Frequency response: 20-18.000 Hz -3 /- 2dB
• FIM distortion at recommended tracking force, DIN 45.542: < 1%
• Tracking ability at 315Hz at recommended tracking force: 80 µm
• Compliance, dynamic, lateral: 12 µm/mN
• Stylus type: Spherical
• Stylus tip radius: R18
• Equivalent stylus tip mass: 0,6 mg
• Tracking force range: 2-4 g (20-40 mN)
• Tracking force, recommended: 3,0 g (30 mN)
• Tracking angle: 20°
• Internal impedance, DC resistance: 1325 Ohm
• Internal inductance: 765 mH
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 200-600 pF
• Cartridge colour, body/stylus: Red/Red
• Cartridge weight: 18,5 g
• Replacement stylus unit: Digitrack
Numero di oggetti nell'imballo:1
Numero di oggetti per scatola:1
